Faucet That Spits?

Written on 7:52 PM by Unknown

Fix a Faucet That Spits

Time: Five minutes.

What you need: Two rags, an adjustable wrench or pliers, painter’s or masking tape, dish detergent, a sponge, and a wire brush.

How-to: Chances are you have a dirty aerator―the mesh piece located inside the tip of the faucet. All you have to do is take it out and clean it. (If it’s beyond repair, buy a replacement at a hardware store.) Before you start, place one rag over the drain to catch any falling parts and spread another on the counter so you can lay the pieces on it. Cover the jaws of the wrench or pliers with tape to avoid scratches. Unscrew the tip of the faucet, turning it counterclockwise with your fingers or, if it’s on too tight, one of the tools. The aerator may be made up of several components. Set them down in the order you remove them. Wash each with warm water, dish detergent, and a sponge; use a wire brush for caked-on grime. Reassemble the parts in the reverse order, screw the unit back on―and overflow with pride.

A pro charges: $100
DIY cost: $0

If you enjoyed this post Subscribe to our feed